GW Instek GDS-200 Series User Manual - Manual (Page 152)

GDS-200 & GDS-300 Series User Manual
152
Temperature Measurement
Back Ground The GDS-300 can measure temperature using a
thermocouple. To measure temperature, the
DMM accepts a thermocouple input and
calculates the temperature from the voltage
fluctuation. The thermocouple type is taken
into consideration. Temperature measurement
is only supported on the GDS-300.
Note
Please see the specifications on page 184 for the
thermocouple specifications.
Connection
10A MAX
FUSED
V W COM A mA
GDS-220 Digital Storage Oscilloscope
200 MHz 1GSa/s
COM V
W
CAT II 600V
CAT III 300V FUSED
600mA MAX
Steps 1. From the multimeter settings choose the
temperature measurement.
 Pressing the Temperature button will
toggle between ºC and ºF.
Temperature = /
2. Next, select the thermocouple type.
Thermocouple = B E, J, K, N, R, S, T