Micromod MOD: Modcell 2050R Users Guide - Manual (Page 78)

IB-23C650
SETUP
Table 4. Milliamp Output Setup Menu
Step Step Description
Top
Display
1 Milliamp Output Menu.
UP moves to DIG INPT **MENU**.
DN moves to RELAYS **MENU**.
SCRL to begin setup at Step 2.
MA. OUTP
2 Output Current at 100%.
UP or DN sets value.
SCRL to advance to Step 3.
OUTPUT
3 Output Current at 0%.
UP or DN sets value.
SCRL to advance to: Step 4 if output type is
HEAT/COOL, or Step 6 otherwise.
OUTPUT
4 Heat Output High Limit.
UP or DN sets value.
SCRL to advance to Step 5.
HEAT OUT
5 Cool Output High Limit.
UP or DN sets value.
SCRL to advance to Step 9.
COOL OUT
6 Output High Limit.
UP or DN sets value.
SCRL to advance to Step 7.
OUTPUT
7 Output Low Limit.
UP or DN sets value.
SCRL to advance to Step 8.
OUTPUT
8 Output Limited in Manual
UP or DN selects YES or NO
SCRL to advance to Step 9.
LIMIT IN
9 Power-Up Output Source.
UP or DN selects LAST or FIXED.
SCRL to advance to: Step 9.1 from FIXED, or
Step 1 from LAST if output 2 is NOT installed, or
Step 11 from LAST if output type is HC/CC
(heat/cool, dual mA), or Step 10 otherwise
POWER UP
72