Micromod MOD: Modcell 2050R Users Guide - Manual (Page 214)

IB-23C650
CALIBRATION DATA
Table 15. Main/Option Board Calibration (Base Configuration Menu)
Step Step Description
Top
Display
16.3 Process Input Ma. Resistance Ratio
UP begins entry at most significant digit. Use UP
or DN to set the digit, then SCRL to scroll to the
next digit. Repeat for all digits.
SCRL advances to:
Step 16.3.1 if value was changed.
Step 16.4. otherwise.
PROC INP
16.3.1 Are You Sure You Want to Change Process Ma.
Res. Ratio?
UP selects YES or DN selects NO.
SCRL advances to:
Step 16.3 on NO. Step 16.4 on YES.
ARE YOU
16.4 Process Input Circuit Compensation
UP begins entry at most significant digit. Use UP
or DN to set the digit, then SCRL to scroll to the
next digit. Repeat for all digits.
SCRL advances to:
Step 16.4.1 if value was changed.
Step 16.5. otherwise.
PROC INP
16.4.1 Are You Sure You Want to Change Process
Input Circuit Compensation?
UP selects YES or DN selects NO.
SCRL advances to:
Step 16.4 on NO. Step 16.5 on YES.
ARE YOU
16.5 Output Current Ratio
UP begins entry at most significant digit. Use UP
or DN to set the digit, then SCRL to scroll to the
next digit. Repeat for all digits.
SCRL advances to:
Step 16.5.1 if value was changed.
Step 17. otherwise.
OUTPUT
16.5.1 Are You Sure You Want to Change Output
Current Ratio?
UP selects YES or DN selects NO.
SCRL advances to:
Step 16.5 on NO. Step 17 on YES.
ARE YOU
208