Micromod MOD: Modcell 2050R Users Guide - Manual (Page 75)

IB-23C650
SETUP
Table 3. Digital Input Setup Menu
Middle
Display
Bottom
Display
Entry Description
LOCKOUT YES
NO
= Locks out the front panel ramp/soak
commands indicated
R/H,RSET = Run/hold, reset commands
locked if run/stop selected
RUN/HOLD = Run/hold commands
locked if run/hold selected
SKIP = Skip commands locked if
run/skip selected
= Allows all front panel commands to the
ramp/soak algorithm
Also see note in 2.1.2 above.
DI2 FUNC RUN/STOP
RUN/RSET
RUN/HOLD
= If DI closed: start counting at preset value
If DI open: reset and stop at preset value
= If DI closed: continue from current count
If DI open: reset and begin counting from
preset value
= If DI closed: continue from current count
If DI open: stop and hold current count
LOCKOUT YES
NO
= Locks out the front panel totalizer
commands indicated
R/H,RSET = Run/hold, reset commands locked
if run/stop selected
RESET = Reset commands locked if
run/reset selected
RUN/HOLD = Run/hold commands
locked if run/hold selected
= Allows all front panel commands to the
totalizer algorithm
Also see note in 2.1.2 above.
LOCKOUT YES
NO
= Locks out the front panel selection of active
set-point
= Allows front selection of active set-point
When both digital inputs are used for set-point
selection, this choice applies to both. They are
not independent.
Also see note 2.1.2 above.
69