Changing the password at the profit point, Creating a passwd key on the profit point – Gasboy CFN III V3.6 and Later User Manual
Page 89

MDE-4739A CFN III PCI Secure Controller Software Installation/Upgrade Instructions · July 2010
Page J-3
Setting Up the PLU Data File
Correcting the Profit Point Issues
Creating a Sign On/Sign Off Key on the Profit Point
Cashiers signing on and off will now be a normal operation. This can be accomplished by
pressing 1 and the SPEC FUNC key. A console key can also be created.
1
Exit the Profit Point Sales screen to the Main Menu (press 0 and then press SPEC FUNC).
2
Select #4 Configuration.
3
Select #3 Keyboard Config.
4
Select Configure Keys.
5
Select an unused key for the new function and press it.
6
Select #4 Function.
7
Select #1 Special Function ??.
8
Type 1 (Sign On/Off). Then, save the keyboard change and exit.
Changing the Password at the Profit Point
If you have a Profit Point and you are accepting credit cards, each cashier, must have their own
unique User and Password.
This can be done manually by selecting SPEC FUNC #30 (Command Mode), the typing onto
the POS or PC keyboard the command PASSWD and pressing enter. For security purposes,
user passwords must be complex. This means that they must include a mix of both alphabets
and numbers. Another option for this is to create a User key and assign that key to the POS
system’s keyboard layout, making it a much easier. Below are the steps to set this up.
Creating a PASSWD Key on the Profit Point
To create a PASSWD Key on the Profit Point, proceed as follows:
1
Exit the Profit Point Sales screen to the Main Menu (press 0 and then press SPEC FUNC).
2
Select #4 Configuration.
3
Select #3 Keyboard Config.