Gasboy CFN III V3.6 and Later - Manual (Page 35)

MDE-4739A CFN III PCI Secure Controller Software Installation/Upgrade Instructions · July 2010 Page 29
Installing the Windows XPE OS Image Installation
With a standard 104-keyboard, proceed as follows:
a Press 0 (numeric keypad).
b Press F11.
c Press 0.
d Press Enter to exit to OS.
Close All PC Loop Applications and Then the SC3 Window Last
To close the PC Loop Applications, proceed as follows:
a Click each application shown in the Task Bar.
b Hold down the Alt key and then press the X key, to close the application. Each window
must close in a few moments. If a logger is installed and working you will see the
associated devices go “out of service”. This is normal and expected.
c After all other Loop Applications have closed close the SC3 window. You are now ready to
proceed.
2 Change the BIOS Setting for “First Boot Device” to be “CD ROM” C and A or similar.
a Click Start.
b Click Shut Down.
c From the drop-down box click Restart.
d Click OK. Windows NT will shut down and the PC will begin to reboot. You will see a
black screen and then the BIOS/checking memory screen.
e Press Delete several times to enter the BIOS setup. If you access the Windows NT OS
loader screen you have missed the required BIOS screen. You have to repeat this step after
the tower completes the restart process. Ensure that you close all open windows first.
f Using the arrow keys, highlight “Advanced BIOS Settings /BIOS Feature Setup” and press
Enter.
Note: The mouse does not function in the BIOS screens and the arrows, +, -, Pg Up,
Pg Dn, Esc, and Enter keys must now be used.
g Use the
↓ arrow key move to “First Boot Device” so that it is highlighted. Note the current
setting so that it can be restored after the upgrade process is completed.