beautypg.com

Completing the upgrade, Installing/upgrading the pc loop application, To step – Gasboy CFN III V3.6 and Later User Manual

Page 53

background image

MDE-4739A CFN III PCI Secure Controller Software Installation/Upgrade Instructions · July 2010

Page 47

Installing/Upgrading the PCI-compliant CFN III and Integral Profit Point Software

Installation

A Sign On key for the cashiers can be set up for the cashiers. A Change Password key can also
be created to allow the cashiers to enter a new password before the 90-day expiration occurs.

Completing the Upgrade

44

To complete the upgrade, proceed as follows:

a

On an upgrade of PCI software, it is assumed that the PCI security requirements have
already been completed. This would include the following:
• Admpass program has been run and all users and passwords are already in place.
• Security program has been run and the Master and Pass Keys have already been

established.

• Audit Journal, Journal, and Next Day have been set up and working correctly.
• Profit Point display, sign on, and password keys have been set to the customer’s

satisfaction.

It is also assumed that the technician is fully aware of any prior issues with the original
install and these have been addressed. The technician is fully aware of administrator and
Sign on procedures.

b

Close the Profit Point window (if installed).

c

Sign on as the Windows XPE administrator.

d

Type FIX TR;I and press Enter, to avoid duplicating the individual transaction settlements
after the upgrade.

e

Type FIX_CONF press Enter. This will update the Framos.cfg file.

f

Type REBOOT:A press Enter. This will load the new version and configuration to the
SC3 board set.

Installing/Upgrading the PC Loop Application

45

Reinstall the PC Loop Applications using the same ports as you recorded in

“Checklist for

Windows XPE Install and/or CFN Software Install or Upgrade”

on

page 25

of this manual.

Since the XBIN directory was backed up and copied back on to the hard drive, you must not
reset the pump addressing.

Note: You must always have a copy, either electronic or printed of the required PC Loop

Application manuals for reference. The manuals are available on the SC3 tower desktop
“CFN Help” icon.