Gasboy CFN III V3.6 and Later - Manual (Page 82)

Audit Journal Setting Up the Cron Command for Journal.log File Handling
Page H-4 MDE-4739A CFN III PCI Secure Controller Software Installation/Upgrade Instructions · July 2010
Type 1 and press Enter. It will ask you if you wish to preserve the existing Day.fmt. You can
just press Enter all the way through the prompts if you wish. You can also follow the prompts
and enter the fuel products and names, and then when it asks for merchandise just press Enter.
When the prompts comes up “Has all Merchandise been listed”, respond with the no response
and then press Enter all the way through the rest of the prompts.
Type 2 and press Enter. Follow the same pattern you did when you created the Day.fmt file.
It is not required to configure Clerk Reports.
Type 4 and press Enter. You can enter each item that shows a value other than 0 for reports to
print.
Now when NEXTDAY 1 is run, Shift and Day reports will be created in the Reports directory
based upon the details provided when Setup Shift and Setup Day were executed.