Preparing for a pci upgrade of cfn iii, Windows xpe – Gasboy CFN III V3.6 and Later User Manual
Page 41
MDE-4739A CFN III PCI Secure Controller Software Installation/Upgrade Instructions · July 2010
Page 35
Installing/Upgrading the PCI-compliant CFN III and Integral Profit Point Software
Installation
Preparing for a PCI Upgrade of CFN III
To prepare for upgrading CFN III tower, proceed as follows:
1
Log on as User “Administrator” as follows: (Only on Upgrade)
a
Click Start.
b
Click Shutdown.
c
Select “Log off gasboy” from the drop down box and click OK. If other programs are
running on the system, a prompt box will pop-up requesting those programs to be closed.
Close or shutdown each of those programs.
d
In the “User Name” field type administrator, (the default password for administrator is a
blank password field), press Enter.
e
Click OK.
2
Close all Gasboy windows such as all Profit Point, PC LOOP applications, and then the SC3
window. (Only on Upgrade). Perform the procedure outlined in step
.
Note: The “Services” must be stopped to allow the CFN install CD to update these services.
New Installation of PCI-compliant CFN III after a Reimage to Windows XPE
For new install of PCI-compliant CFN III after reimage of Windows XPE, proceed as follows:
Note: Log on as Administrator to proceed.
3
Insert the “Customer Disk” into the A: drive that contain the following files:
• A PCI-compliant version of Framos.bin file specifically compiled with the requested
drivers for this location.
• A default/generic configuration, Framos.cfg file.
• (Optionally) An Update.zip file that contains the required network files to match the driver
version loaded in the Framos.bin file.
Use Windows Explorer to verify if these files are present on the “Customer Disk”. An
Update.zip can be explored without unzipping to ensure that you have the correct Network
files. Names of the files in the Bin directory of an Update.zip file must generally match the
network to be installed or upgraded. The version of the .bin files cannot be verified. Do not
proceed if you have the wrong files or missing files. Contact the Gasboy Help Desk at
1-800-444-5529.
4
Insert CFN III CD-ROM into the CD-ROM drive.