EXFO AXS-200/850 Ethernet Test Set - Manual (Page 99)

RFC 2544
Ethernet Test Set 89
Latency Results
³
Results In: The latency value is expressed in ms by default. The user
can also specify the values to be displayed as μs.
The latency results displayed on the bottom half of the page are displayed
for the selected frame size distribution.
Note: The Pass/Fail verdict is displayed for each frame size. To set the Pass/Fail
verdict, refer to the RFC 2544 Global Configuration tab. See Pass/Fail
Verdict on page 60.
= PASS
= FAIL