EXFO AXS-200/850 Ethernet Test Set - Manual (Page 54)

Setup
44 AXS-200/850
SFP
SFP
The optical interface on the module is made available via a Small Form
Factor Pluggable Module (SFP). For a list of supported SFPs, refer to Optical
Transceivers (SFP) on page 4.
Press , select Setup, Interface, and the SFP tab.
The following information is displayed
on the SFP page.
³
Module ID
³
Vendor Name
³
Part Number
³
Serial Number
³
Connector Type: LC, MT-RJ, etc.
³
Speed: 100Base-FX, 1000Base-SX, etc.
Note: Ensure that the speed selected corresponds to the speed of the SFP
installed.
³
Type: Reach type: SR, IR, LR, etc.
³
Wavelength: 850 nm, 1310 nm, 1550 nm.
³
Mode: Single Mode Fiber (SMF) or Multi-Mode Fiber (MMF).