EXFO AXS-200/850 Ethernet Test Set - Manual (Page 146)

Traffic Generation & Monitoring
136 AXS-200/850
Jitter/Latency Configuration
Jitter/Latency Configuration
Press , select Traffic Generation & Monitoring, Stream Config, and the
Jitter/Latency tab.
Jitter Configuration
³
Jitter: The Jitter parameter allows to enable or disable the Jitter
proprietary information insertion in the payload and offers a
pre-defined selection of profiles.
The following pre-defined profiles are available when frame structure
Ethernet/IPv4/UDP or Ethernet/IPv6/UDP is selected. See Framing on
page 125.
³
VoIP G.711
³
VoIP G.723.1
³
VoIP G.729
³
IPTV SDTV (MPEG-2)
³
IPTV HDTV (MPEG-2)
³
IPTV HDTV (MPEG-4)
³
User defined
³
Disabled