EXFO AXS-200/850 Ethernet Test Set - Manual (Page 191)

Traffic Generation & Monitoring
Ethernet Test Set 181
Logger
Note: The alarm events will not display any details.
Note: The Logger table can display up to 500 event entries. Once the Logger table
reports 500 event entries, the Log Full indicator will change to Red and no
further entries will be possible but the events in the Pending state will be
updated if a test is running.
The Event Logger information will be cleared under the following
conditions:
³
When the test is reset or started.
³
When the unit is suspended.
³
When stopping the current test and navigating to other tests.
³
When the unit is restarted.
Note: The entry remains in the Pending state as long as the event is not
completed and it is highlighted in Yellow color.
Note: The Threshold Crossing events are displayed in Red color.
The following tabs are displayed at the bottom of the table:
³
Page Up: Allows to scroll up by one page.
³
Page Down: Allows to scroll down by one page.
³
Top/Bottom: Allows to toggle between the top and bottom of the table.
When the bottom of the page is displayed, Top changes to Bottom and
vice versa.
When the top of the page is currently displayed, pressing Bottom will
display the bottom of the page and vice versa.
The Logger table provides the Auto-Scroll feature. It allows to display the
latest events in the table as soon as they occur. Pressing Bottom will allow
to jump to the last entry.