EXFO AXS-200/850 Ethernet Test Set - Manual (Page 140)

Traffic Generation & Monitoring
130 AXS-200/850
Stream Configuration
Stream Configuration
The Sequence Tracking parameter determines if proprietary information is
inserted in the payload of the transmitted frames for Frame Loss and
Out-Of-Sequence detection.
Press , select Traffic Generation & Monitoring, Stream Config, and
the Stream tab.
Note: Only Destination MAC Address is configurable, if Ethernet framing is
selected in Global Configuration.
³
Destination MAC Address: Enter the MAC Address if the Resolve MAC
Address is disabled. The default setting is FE:FE:FE:FE:FE:FE.
When the Destination MAC
Address field is selected for
editing, the Latest MAC’s button
appears on the bottom left corner
of the screen. Press the
corresponding function key to
display the list of previously
configured MAC addresses. Select
the desired MAC address from the
list, if any.
³
Resolve MAC Address: Enable or
disable Resolve MAC Address.
The default setting is Disabled.
When enabled, an ARP request is
sent to the network to retrieve the
MAC Address corresponding to
the selected IP address for IPv4.