EXFO AXS-200/850 Ethernet Test Set - Manual (Page 97)

RFC 2544
Ethernet Test Set 87
Frame Loss Results
³
Step: Determines which step is displayed.
³
Results In: The frame loss value is expressed in %.
The frame loss results displayed on the bottom half of the page are
displayed for the selected frame size distribution.
Note: When the Dual Test Set parameter is set to Local in Global Configuration
on page 58, the Frame Loss subtest results are presented independently for
each direction: Local-to-Remote and Remote-to-Local.
Note: For DTS RFC 2544, the results for the
Local-to-Remote direction are
obtained between test iterations.
Note: The Pass/Fail verdict is displayed for
each frame size. To set the Pass/Fail
verdict, refer to the RFC 2544 Global
Configuration tab. See Pass/Fail
Verdict on page 60.
= PASS
= FAIL