Optical 100/1000 mbps ethernet port – EXFO AXS-200/850 Ethernet Test Set User Manual
Page 33

Signal Connection and LEDs
Ethernet Test Set
23
Optical 100/1000 Mbps Ethernet Port
Optical 100/1000 Mbps Ethernet Port
The AXS-850-1module provide respectively one optical port for
100Base-FX/1000Base-X Ethernet testing. The optical port is Small Form
Factor Pluggable (SFP) slot type (Dual or Simplex LC connector).
³
Insert one of the following SFP modules into the optical slot.
Note: Refer to Optical Transceivers (SFP) on page 4 for the list of supported SFPs
that can be ordered through EXFO.
³
Carefully connect optical fiber cables to the SFP’s IN and OUT ports. To
ensure good signal quality, make sure that the optical fiber connector is
fully inserted into the optical connector port.
Rate
Description
100Base-X
1310 nm SFP module for 100Base-FX, MMF, 2 Km.
1310 nm SFP module for 100Base-LX10, SMF, 15 Km.
1000Base-X
850 nm SFP module for 1000Base-SX, 550 m.
1310 nm SFP module for 1000Base-LX, 10 Km.
1550 nm SFP module for 1000Base-ZX, 80 Km.
1000Base-BX
1310 nm TX, 1490 nm RX, SFP module for
1000Base-BX-U, SMF, 10 Km.
1490 nm TX, 1310 nm RX, SFP module for
1000Base-BX-D, SMF, 10 Km.