beautypg.com

EXFO AXS-200/850 Ethernet Test Set User Manual

Page 46

background image

Setup

36

AXS-200/850

Port

7. Set the Flow Control. This option is applicable to the RFC 2544 test

and Traffic Generation test. Flow Control is not supported (set to
None) for BERT and Smart Loopback tests. When Flow Control is
enabled, the AXS-200/850 will stop transmitting for the requested time
value specified by the valid flow control frame received. The choices
are None, and RX. The default setting is None. When set to None,
pause frames received are ignored.

Note: For Auto, the negotiated flow control is displayed besides the flow control

configuration parameter.

8. Frequency: Indicates the frequency of the input signal in Mbps. When

no frequency reading is possible, “--” is displayed.