EXFO AXS-200/850 Ethernet Test Set - Manual (Page 48)

Setup
38 AXS-200/850
Network
4. If DHCP is disabled, enter the Subnet Mask for the Ethernet port. The
default value is 255.255.0.0.
5. Enable or disable the Default Gateway. The default setting is Disabled.
If enabled, enter the default gateway address for the Ethernet port. The
default value is 0.0.0.0.
6. The DHCP Server Address displays the DHCP server IP address when
DHCP is enabled.
7. The DHCP Lease Obtained displays the date and time that the IP
address was leased from the DHCP server when DHCP is enabled.
8. The DHCP Lease Expires displays the date and time that the IP
address lease will expire when DHCP is enabled.
If IPv6 option is selected as the IP version, configure the remaining fields as
below.
9. Link-Local IPv6 Address (LLA) is
used for local communication
between on-link neighbors and for
Neighbor Discovery process.
Mode
³
StatelessAuto allows
automatic generation of the
IPv6 address based on the
MAC address. The mode
StatelessAuto is selected by default.
³
Static allows to enter the IP Address.