EXFO AXS-200/850 Ethernet Test Set - Manual (Page 32)

Signal Connection and LEDs
22 AXS-200/850
Electrical 10/100/1000 Mbps Ethernet Port
Electrical 10/100/1000 Mbps Ethernet Port
The AXS-200/850 Ethernet Test Set module provides one electrical port for
10Base-T, 100Base-TX, or 1000Base-T. This port may also be used for cable
testing.
Note: Refer to section A for cable specifications.
³
Connect the 10/100/1000 electrical signal or the cable to be tested to
the port with the RJ-45 connector.
³
LEDs for the electrical port:
LED Status Description
LINK/ACT
(Green) On Ethernet link up.
Off Ethernet link down.
Flashing TX/RX activity.
DUPLEX
(Yellow) On Full Duplex mode.
Off Half Duplex mode.
Flashing Collisions are detected.