EXFO AXS-200/850 Ethernet Test Set - Manual (Page 49)

Setup
Ethernet Test Set 39
Network
Address: This field is configurable only when the Mode is Static. The
Link-Local IPv6 Address must start with FE80. The accepted range is
from FE80:0000:0000:0000:0000:0000:0000:0000 to
FE80:0000:0000:0000:FFFF:FFFF:FFFF:FFFF. The default address is
FE80::[Interface ID], where [Interface ID] is generated from the
source MAC address. When the Address field is selected for editing,
the Latest IP’s button appears on the bottom of the screen. Press the
corresponding function key to display the list of previously configured
IP addresses. Select the desired IP address from the list, if any.
10. Global IPv6 Address (GUA) is used to communicate with on-link
neighbors and for global communication with hosts outside the
subnet.
Mode
³
None disables the Global IPv6 address and the Default Gateway
address.
³
StatelessAuto allows automatic generation the IPv6 address based
on the Link-Local address interface ID and the prefix obtained
from the router advertisements. If no Interface ID has been
obtained for the Link Local Address, the Global address will not be
generated. The mode StatelessAuto is selected by default.
³
Static allows to enter the IP Address.
Address: This field is configurable only when the Mode is Static. The
accepted range is from 0000:0000:0000:0000:0000:0000:0000:0000
to FEFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF. The default address s
2001::[Interface ID], where the [Interface ID] is generated from the
source MAC address. When the IP Address field is selected for editing,
the Latest IP’s button appears on the bottom of the screen. Press the
corresponding function key to display the list of previously configured
IP addresses. Select the desired IP address from the list, if any.