EXFO AXS-200/850 Ethernet Test Set - Manual (Page 217)

Tools
Ethernet Test Set 207
Report Configuration
Report Configuration
The configurable parameters appear on the top of the report page.
Press , select Tools, Report, and the Configuration page.
³
Report Header: Enter the Report
header information. The header
can be the company name for
example, and must be less than 30
characters long.
³
Report Title: Enter the report title
which must be less than 30
characters long. This can be the
name of the product, name of test,
or test number for example.
³
User Information: Enter any additional information of up to 30
characters.
³
Report Prompt: When enabled, a prompt will pop up every time a test
case is stopped or completed to ask the user if a report generation is
desired.
³
Media Selector: Allows the selection of the media where the report
files will be saved. Choices are Internal Flash Memory or USB key.
The default media is Internal Flash Memory.
When Internal Flash Memory is selected, the report file will be saved
to the \Data\My Documents\NetBlazer850\Reports folder.
When USB key is selected, the report file will be saved on an USB
memory media. However, if no USB key is not present, the user will be
prompted to save the report to the internal flash.