EXFO AXS-200/850 Ethernet Test Set - Manual (Page 111)

BERT
Ethernet Test Set 101
Stream Configuration
Stream Configuration
Press , select BERT, Configuration, and the Stream tab.
Note: Only Destination MAC Address is configurable, if Ethernet framing is
selected in Global Configuration.
³
Destination MAC Address: Enter
the MAC Address if the Resolve
MAC Address is not enabled. The
default setting is:
FE:FE:FE:FE:FE:FE.
When the Destination MAC
Address field is selected for
editing, the Latest MAC’s button
appears on the bottom of the
screen. Press the corresponding function key to display the list of
previously configured MAC addresses. Select the desired MAC address
from the list, if any.
³
Resolve MAC Address: Enable or
disable Resolve MAC Address The
default setting is Disabled.
When enabled, an ARP request is
sent to the network to retrieve the
MAC Address corresponding to the
selected IP address for IPv4.
When enabled, a Neighbor
Solicitation request is sent to the
network to retrieve the MAC Address corresponding to the selected IP
address for IPv6.