EXFO AXS-200/850 Ethernet Test Set - Manual (Page 61)

Setup
Ethernet Test Set 51
Module
Module
Press , select Setup, and the Module tab.
The Module page allows configuration
of the following parameters:
³
Module ID: The Module ID is used
to easily identify the unit when
auto-discovered in a network. Up
to 16 alpha-numeric characters are
supported.
³
Default Configuration: Select the
Restore button to restore the
default settings of the module.
³
Restore Default at Start-Up: Enable or disable the module’s
configuration to be restored upon start-up. If enabled, the user will be
prompted at start-up if the default settings should be restored.