EXFO AXS-200/850 Ethernet Test Set - Manual (Page 86)

RFC 2544
76 AXS-200/850
Summary Results
³
Aborted – Invalid Configuration
³
Aborted – Loss of remote connection
Note: This status will appear only when the Dual Test Set Connection is lost
during the DTS RFC 2544 test.
Once the RFC 2544 subtests are completed or stopped, the Pass/Fail
verdict is displayed for each subtest, when enabled. To set the
Pass/Fail verdict, see Pass/Fail Verdict on the Global Configuration
page 60.
³
Start Time: The time when the RFC 2544 test was started.
³
Duration: The length of time from when the RFC 2544 test was started,
until when the test was completed.
³
Report: Select the Report button to generate the report file of the
results and statistics. See Report Generation on page 79 to generate
and save a report file.
Note: While a subtest is in progress, the status and results are displayed on the
bottom half of the page in real time, and are retained in the detailed results
tab of each subtest. These values do not appear if subtests are not in
progress.
The current test Frame Size status and the previous tested Frame Size
results are listed. The results are described as follows:
³
Val. #: Available only for the Throughput subtest. This value indicates
the current validation number in progress.
³
Trial #: Available only for Back-to-Back and Latency subtests. This
value indicates the current trial number in progress.