TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 94)

4-2 Chapter 4 - Real-time Operation
Product Application
Fieldware-SA for the Legacy 6000
Software Version 2.00
Product Application
When the Real-time Setup process is complete (see Chapter 3 - Real-time Setup on page 3-1),
product application can begin. This is accomplished by pressing the ARM Bull’s-eye located on the
ARM Main Launcher page (Figure 4-1).
When the ARM Bull’s-eye soft-key is pressed, the Fieldware - SA software loads all setup informa-
tion, including Implement and Controller setup. This loading process may take a few seconds to
complete. When the loading process is complete, the Rates page (Figure 4-2) is the first real-time
page seen.
Figure 4-1: The ARM Launcher Page
ARM Bull’s-eye
soft-key