TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 128)

4-36 Chapter 4 - Real-time Operation
Mapping a Field Boundary
Fieldware-SA for the Legacy 6000
Software Version 2.00
Figure 4-35 shows the vehicle about to complete driving the field perimeter. The initial guideline
has been established and a product application map is being created while mapping the field
boundary. When the vehicle approaches the starting point, within approximately 30 ft. (10 m), the
boundary automatically closes.
Figure 4-34: Marking Initial Guideline
Figure 4-35: Mapping Boundary while Applying Product