TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 115)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 4 - Real-time Operation 4-23
Real-time Guidance Operation
Step 2: Select Headland Off Mode
When the last headland pass has been completed, press the Headland Off button. The data col-
lected between pressing the Headland On and then the Headland Off buttons are now considered
the data that represents the applied headland portion of the field. Figure 4-19 shows the vehicle
applying the second headland pass. The Headland OFF button is shown to the left.
Figure 4-19: Applying the Second Headland Pass