TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 155)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 5 - Fieldware FieldPilot 5-17
Fieldware-SA Real-Time Operation
The Nudge/Trim Feature
The Nudge-Trim feature allows for corrections to the current guideline. To use the Nudge-Trim fea-
ture, first set an increment value in FieldPilot setup. See “Running FieldPilot Setup” on page 5-8
for details on how to do this.
In real-time operation, select the Nudge-Trim soft-key (Figure 5-16). A pop-out menu appears with
Trim Left, Trim Right, and Clear Trim. To correct the line left or right select the appropriate menu
item. To clear all corrections applied to the current guideline, select the Clear Trim item.
Apply On soft-key. Indicates the current application status is ON. When
pressed, drawing of the vehicle trajectory behind the vehicle in the map page
will be stopped. This soft-key changes to the Apply Off soft-key.
The Auto-Hold soft-key. When pressed, the application trajectory automatically
turns off when the vehicle travels over a previously applied area.
Figure 5-16: The Nudge/Trim Menu
Soft-key Description
Table 5-4: Real time Soft-key Description