TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 51)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 2 - Getting Started 2-39
System Tools
The Plug-Ins activated can be reviewed from the Console Information page.
Backing up Console System Files
The Legacy 6000 (L6K) system files can be backed up to a PC card. This allows the system to be
restored at a later date or transferred to another L6K console if necessary.
Required Items:
• 20 Meg (or larger) ATA Flash PC Card
CAUTION: Always make sure that the console is powered off before inserting or removing
the PC card.
With the console powered down, insert a blank PC card into the Legacy 6000 console and power
up the console.
From the Main Launcher page (Figure 2-2), select System Tools (Figure 2-28) / Device Manager
(Figure 2-29) / Console (Figure 2-31) / Backup Console System Files. The message “Performing
console backup” appears. When the backup operation has completed, turn the console off and
remove the PC Card.
Restoring Console System Files
With the console powered down, insert the PC card, containing the desired system files, into the
Legacy 6000 console and power up the console.
From the Main Launcher page (Figure 2-2), select System Tools (Figure 2-28) / Device Manager
(Figure 2-29) / Console (Figure 2-31) / Update Console. The message “Update Files” appears.
Select ALL and press the Enter key. The message “Updating console” appears. When the restore
operation has completed, turn the console off and remove the PC Card.