TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 53)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 2 - Getting Started 2-41
System Tools
GPS Receiver
This tool allows the viewing of any GPS data coming into the com port on the Legacy 6000. It is
recommended this diagnostic be run the first time the GPS receiver is connected to the Legacy
6000 console.
To access the GPS Receiver diagnostic page from the Main Launcher page (Figure 2-27) / System
Tools page / GPS Receiver (Figure 2-32).
Figure 2-32: The GPS Receiver Diagnostic Page