TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 25)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 2 - Getting Started 2-13
System Setup
Console Setup
Console Setup defines system environment settings (units, language, time) that are displayed on
the console and used in the rate control and guidance applications.
To access Console Setup from the Main Launcher page (Figure 2-2), select System Setup (Figure
2-7) / Console Setup (Figure 2-8). All console setup parameters are listed in Table 2-5.
To change any of the system environment settings, highlight the setting name listed in the center
column of the Console Setup page and press Enter. The Setup Wizard can be used to walk
through and change any or all of the settings. When done making changes, press the Forward
Arrow to save and exit Console Setup. Press the Back Arrow to exit without saving any changes.
It is recommended that the correct date and time be set prior to any product application and data col-
lection.
.
Figure 2-8: The Console Setup Menu Page