TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 15)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 2 - Getting Started 2-3
Software Overview
Powering Up
To power up the Legacy 6000 console, press the orange button to the left side of the console face-
plate (Figure 2-1). When the Legacy 6000 console is powered up, Fieldware - SA for the Legacy
6000 automatically starts. The first software page is the Main Fieldware - SA Launcher (Figure 2-
2). System Setup, System Tools, and Application Rate Manager (ARM) are accessed from the
Main Launcher page. This Chapter focuses on how Fieldware - SA for the Legacy 6000 operates
and how to configure the system using the System Setup application.
Figure 2-1: The Legacy 6000 Console
Power On/Off
Enter Key
Arrow Keys
Escape Key
Function Keys
(Right Side) Function Keys
(Left Side)
Brightness &
Contrast