TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 29)

Fieldware-SA for the Legacy 6000
Software Version 2.00
Chapter 2 - Getting Started 2-17
System Setup
GPS Receiver Setup
GPS Receiver setup defines the DGPS accuracy and how the GPS receiver communicates with
the Legacy 6000 console. GPS Receiver setup parameters are listed in Table 2-7.
To access GPS Setup from the Main Launcher page (Figure 2-2), select System Setup (Figure 2-
7) / GPS Receiver Setup (Figure 2-10).
To change any of the GPS Receiver settings, highlight the setting name listed in the center column
of the GPS Receiver Setup page and press Enter. The Setup Wizard can be used to walk through
and change any or all of the settings. When done making changes, press the Forward Arrow to
save and exit GPS Receiver Setup. Press the Back Arrow to exit without saving any changes.
GPS Receiver Setup is not present when FieldPilot is activated.
Figure 2-10: The GPS Receiver Setup Menu Page