TeeJet Fieldware SA 2.0 for Legacy 6000 - Manual (Page 82)

3-26 Chapter 3 - Real-time Setup
Running Product Setup
Fieldware-SA for the Legacy 6000
Software Version 2.00
Product Setup Menu Items
Setup Item Description
Prescription
If Variable Rate product application is to be done, select the prescription file
(.ARM) that contains the prescription information for a specific product. The
(.ARM) file can be on the root of the PC card, or in the Job folder. The PC card
must be inserted into the Legacy 6000 console. If variable rate application is
not going to be performed, then leave this setting at .
Layer
Some prescription files (.ARM) can contain several products in a single file. A
single product is associated to a single layer. In a multiple product prescription
file, it is necessary to set which layer is associated with which product. If there
is only one product layer in the (.ARM) file, this setup item is automatically set
to layer 1 and this page is skipped in the Product Setup wizard process.
Product
Product Setup contains a product data base contain approximately 4000 prod-
uct names and their associated EPA number. A product name can be selected
from this setup page. If a prescription map (.ARM) is being used, product setup
automatically extracts the product name from the (.ARM) product layer. Select
the setting In the product page.
Table 3-5: Product Setup Item Descriptions