Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 82)

HI-3000 Series 68
Operation and Installation
FIG. 211: ITEM DEFINITION/SEQUENCE NUMBER
OUT
Step 33. Click on File.
Step 34. Click on New.
Step 35. Click on Host Message (See Fig. 212) The Host
Message Definition page appears. (See Fig. 213)
FIG. 212: PROTOCOL PAGE/SELECTING HOST
MESSAGE
Host Message Configuration
FIG. 213: HOST MESSAGE DEFINITION
Step 1. With the General tab selected, click in the Message
Name text field.
Step 2. Enter “SendData” (all one word) without the quota-
tion marks.
Step 3. Click in the Definition text field.
Step 4. Enter ”Write FO00...FO62” without the quotation
marks.
Step 5. Click on the Type pull down menu.
Step 6. Click on Write.
Step 7. Make sure that the check boxes are checked for
“Message should be automatically activated” and
“Message is enabled.”
Step 8. Click on the Request tab. The Request page appears
with nothing entered in the text field. (See Fig. 214)