Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 124)

HI-3000 Series 110
Operation and Installation
SET POINT Ordered weight of a particular ingredient. Weight reading at which a relay will be actu-
ated.
SPAN the total amount of test weights used (placed on the scale) when performing a “Tradi-
tional Calibration”.
TAG Another name for the Secure Memory Module
TARE Artificial zeroing of the weight hopper so that a net weight can be displayed. The
action of adjusting out the known weight of the container from the total indicated
weight, so that the indicator reads net weight directly.
TEMPERATURE
COEFFICIENT the change in indication due solely to a change in temperature from a reference tem-
perature. Expressed as a percentage of span value for a specified temperature
change.
TIME BASE Time in seconds between values subtracted to determine rate-of-change.
TOKEN In programming languages, a single element of a programming language. For exam-
ple, a token could be a keyword, an operator, or a punctuation mark. Used to format
E-mails or to enter parameters into an Custom E-mail.
TRANSMITTER SPAN Value the transmitter puts out with the maximum weight on the load cell.
TRANSMITTER ZERO Value the transmitter puts out with the minimum weight on the load cell.
TTL Transistor-Transistor Logic
TXD Transmit Data
UPDATE RATE Number of times per second a new weight reading is taken.
ZERO Weight reading once the dead load has been offset.
ZERO CALIBRATION Offset of the value of the dead load of the weight hopper.
ZERO TOLERANCE The number of graduations from zero that will be accepted as zero by the instrument.