1 about this documentation, 1 document history, About this documentation – Lenze 8400 BaseLine C User Manual
Page 8: Document history, 1about this documentation, Danger

1
About this documentation
1.1
Document history
8
Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1
About this documentation
This documentation contains information on the parameterisation of the 8400 BaseLine C control-
ler using the integrated keypad and the L-force »Engineer«.
The information in this documentation is valid for the 8400 BaseLine C controller with the following
nameplate data:
Depending on the software version of the controller and the version of the installed »Engineer«
software, the screenshots in this documentation may differ from the representation in the »Engi-
neer«.
Tip!
Information and tools around the Lenze products can be found in the Download area on
1.1
Document history
Danger!
The controller is a source of danger which may lead to death or severe injury of persons.
To protect yourself and others against these dangers, observe the safety instructions be-
fore switching on the controller.
Please read the safety instructions in the mounting instructions and the hardware ma-
nual of the 8400 BaseLine C controller. Both documents are supplied with the controller.
Product series
Type designation
From software version
8400 BaseLine C
E84AVBCxxxxxxxx
01.00
Version
Description
1.6
01/2014
TD05
Error corrections & supplements and converted to new layout
1.5
04/2013
TD05
Error corrections & supplements, parameter reference V03.04.00
1.4
04/2011
TD05
Error corrections & supplements, parameter reference V03.03.00
1.3
09/2010
TD05
Restructuring of some chapters, error corrections & supplements
1.2
11/2009
TD06
Error corrections
1.1
05/2009
TD06
Error corrections
1.0
04/2009
TD06
First edition