Lenze 8400 BaseLine C - Manual (Page 167)

Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05
167
8 Diagnostics & error management
8.7 Error messages of the operating system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
dF03: Internal error 03 [xx.0145.00003]
dF04: Internal error 04 [xx.0145.00004]
dF05: Internal error 05 [xx.0145.00005]
dF06: Internal error 06 [xx.0145.00006]
dF07: Internal error 07 [xx.0145.00007]
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.
Response (Lenze setting printed in bold)
 None  Fault  Trouble  WarningLocked
Cause Remedy
Device error • Mains switching or restart of the controller, respec-
tively.
• If the problem occurs again, you needs to consult Len-
ze.