Lenze PLC Designer PLC-Designer (R2-x) SoftMotion - Manual (Page 89)

DMS 5.2 EN 03/2011 TD17
L
89
L-force | PLC Designer - SoftMotion
CAM editor
Editing a cam
5.4.2 Editing properties of individual cam elements
The attributes of individual elements can be modified in the Properties CAM Element
dialog or by selecting and moving the element in the editor window.
5.4.2.1 Editing a point / line
Double-click the element to open the Cam element properties dialog in which the following
properties of an element can be edited by means of numeric inputs:
Dialog object Properties
Element type Line/Point: The type can be changed here. If a point is changed into a line, then it will
automatically be assigned a certain length; if a line is changed into a point, the
coordinates of the start point of the line will be applied automatically.
Master start, Master end Start and end values (lines only) on the x axis (for unit see Cam properties dialog
(Extras  Settings)).
Slave start, Slave end Start and end values (lines only) on the x axis (for unit see Extras  Settings).
Speed (Points only)
Acceleration (Points only)