Lenze PLC Designer PLC-Designer (R2-x) SoftMotion - Manual (Page 13)

DMS 5.2 EN 03/2011 TD17
L
13
L-force | PLC Designer - SoftMotion
About this documentation
References used
1.5 References used
This documentation uses the following signal words and symbols to indicate dangers and
important information:
Safety instructions
Structure of the safety instructions:
Application notes

Pictograph and signal word!
(characterise the type and severity of the danger)
Note
(describes the danger and gives information about how to prevent dangerous
situations)
Pictograph Signal word Meaning
 Danger! Danger of personal injury through dangerous electrical voltage
Indicates an impending danger that may lead to death or severe personal
injury if the corresponding measures are not taken.
 Danger! Danger of personal injury through a general source of danger
Indicates an impending danger that may lead to death or severe personal
injury if the corresponding measures are not taken.
 Stop! Danger of damage to material assets
Indicates a potential danger that may lead to damage to material assets if
the corresponding measures are not taken.
Pictograph Signal word Meaning
 Note! Important note to ensure trouble-free operation
 Tip! Useful tip for easy handling
 Reference to another documentation