Lenze EPM−T9XX Modular system - Manual (Page 97)

2/4×counter
4
The modular system
4.21
L
4.21−1 EDSPM−TXXX−9.0−11/2009
4.21 2/4×counter
The module 2/4×counter detects the pulses of the connected encoders and
processes these pulses according to the mode selected. The module has two
32−bit counters or four 16−bit counters. Each 32−bit counter has a digital output
which can be triggered depending on the mode.
)
Note!
The chapter "Parameter setting" describes how to parameterise
the module.
l Two 32−bit counters or four 16−bit counters
l One freely configurable digital output per 32−bit counter with an output
current of 0.5 A
l Counter and compare registers loaded via control byte
l Up / down counter, optionally with a channel width of 32 or 16 bits
l Compare and Auto Reload functionality
l Various modes for encoder pulses
l Period and frequency measuring
l LED displays status of the inputs and outputs
0
1
2
epm−t015
Fig. 4.21−1 Overview of 2/4×counter
0
LED for status display
1 Bit address label card
2
Plug−in terminal strip
Description
Features
Overview