Lenze EPM−T9XX Modular system - Manual (Page 73)

4×analog input ±10V
4
The modular system
4.15
L
4.15−1 EDSPM−TXXX−9.0−11/2009
4.15 4×analog input ±10V
The module 4×analog input ±10V has 4 analog inputs. The module assigns a total
of eight bytes of input data in the process image (2 bytes per input). The analog
inputs are isolated with regard to the backplane bus.
)
Note!
The chapter "Parameter setting" describes how to parameterise
the module.
l 4 analog inputs
l Voltage measuring range ± 10 V
l Signal function and data format can be parameterised
l The reference potentials may vary from each other by a voltage differential of
up to 2 V
l Status LED indicates whether the input voltage is outside of the permitted
measuring range
0
1
2
epm−t015
Fig. 4.15−1 Overview of 4×analog input ±10V
0
LED for status display
1
Bit address label card
2 Plug−in terminal strip
Description
Features
Overview