Lenze EPM−T9XX Modular system - Manual (Page 131)

16×dig. I/O compact (three−wire conductor)
5
The compact system
5.3
L
5.3−1 EDSPM−TXXX−9.0−11/2009
5.3 16×dig. I/O compact (three−wire conductor)
The 16×dig. I/O compact (three−wire conductor) module consists of 1 CAN
gateway which serves as an interface to the master bus system as well as 8 digital
inputs, 4 digital outputs and 4 digital inputs/outputs.
Each output can be loaded with up to 1 A. The status of the channels is displayed
by LEDs.
l 8 digital inputs
l 4 digital inputs/outputs, depending on the circuit configuration
l 4 digital outputs
l Voltage supply via an external 24 V DC voltage source
l Connection to the system bus (CAN) via a 9−pole Sub−D plug
l Address and baud rate setting via coding switch
l The baud rate is stored permanently in an EEPROM in the module
l LEDs display the status
0
1
1
2
3
0
5 6 5 4 7
epm−t044
Fig. 5.3−1 16×dig. I/O compact (three−wire conductor)
0 LEDs for status display
1
9−pole Sub−D plug for connection to the system bus (CAN)
2 Coding switch to set address and baud rate
3 External voltage supply connection
4
Terminal strip for digital input signals
5 Terminal strips, additional terminals for wiring
6
Terminal strip for digital output signals
7 Terminal strip for digital input / output signals (optionally configurable)
Description
Features
Overview