Device control – Festo Электромотор MTR-DCI User Manual

Page 94

Text mode
Original mode

Diagnostic

Positioning

Settings

}

HMI control
LCD adjustment

5. Commissioning

5-6

Festo P.BE-MTR-DCI-PB-EN en 1209a

5.2

Commissioning with the control panel (only MTR-DCI-...-H2)

Information on the button functions and on the menu com-
position of the control panel can be found in Chapter 4.

Device control

In order that the control panel can control the connected
MTR-DCI, the control interface of the MTR-DCI must be deac-
tivated and control panel enable must be set [HMI = on]. The
actual status of the ENABLE control bit then has no effect.

•

Select [HMI control] = “on” and then OK .