Festo Электромотор MTR-DCI - Manual (Page 10)

Contents and general safety instructions
VIII
Festo P.BE-MTR-DCI-PB-EN en 1209a
Safety instructions
When commissioning and programming positioning systems,
you must observe the safety regulations in this manual as
well as those in the operating instructions for the other com-
ponents used.
The user must make sure that nobody is in the operating
range of the connected actuators or axis system. Access to
the possible danger area must be prevented by suitable
measures such as protective screens and warning signs.
Warning
Electrical axes can move with high force and at high speed.
Collisions can lead to serious injury to human beings and
damage to components.
Make sure that nobody can reach into the operating range
of the axes or other connected actuators and that no ob-
jects lie in the positioning range while the system is still
connected to a power supply.
Warning
Faults in parameterisation can cause injury to human
beings and damage to property.
Only enable the controller once the axis system has been
installed and parameterised by technically qualified staff.