Festo Электромотор MTR-DCI - Manual (Page 263)

B. Supplementary information
B-57
Festo P.BE-MTR-DCI-PB-EN en 1209a
Carry out the following steps:
• Connect the MTR-DCI to your PC via the RS232 port.
Follow the instructions in section 3.4.
• If necessary, adapt the PC interface to the following trans-
mission protocol.
Transmission protocol
Transmission speed 9600 bit/s
Data format Asynchronous character frame:
– 1 start bit
– 8 data bits
– No parity bit
– 1 stop bit
Tab. B/9: Specifications of the transmission protocol
• You can use the following command to initialise data
transmission and determine the MTR-DCI's response
readiness:
Command 310D
h
Response 31310D
h
1 11
• Select the commands in accordance with the object list in
section B.1 or B.2.4.
• Use CI commands only if you already know their effects
and if they are permitted for your MTR-DCI.
• Transfer the commands using the FCT software or a con-
ventional terminal program.
For the command syntax see appendix B.2.2.