About the version – Festo Электромотор MTR-DCI User Manual

Page 15

Contents and general safety instructions

XIII

Festo P.BE-MTR-DCI-PB-EN en 1209a

About the version

Hardware version

Specifies the version status of the mechanical parts and elec-
tronics of the MTR-DCI.

Firmware version

Specifies the version status of the operating system of the
MTR-DCI.

You can find the version specifications as follows:

–

Hardware version and firmware version under “Device
data” in the Festo Configuration Tool with active device
connection to the MTR-DCI.

–

Firmware version on the control panel under [Diagnostic]
[Software information]

Firmware
version

What is new ?

Which FCT plugin ?

V1.00 and
higher

Supports the listed sizes of the MTR-DCI-PB in combina-
tion with the following Festo axes:
Motor unitAxes
MTR-DCI-32...

DMES-18; DNCE-32

MTR-DCI-42...

DMES-25; DNCE-32/40

MTR-DCI-52...

DMES-40; DNCE-40/63

MTR-DCI-62...

DMES-63; DNCE-63

MTR-DCI V2.0

Tab. 0/2: Firmware versions