Festo Электромотор MTR-DCI - Manual (Page 56)

3. Installation
3-8
Festo P.BE-MTR-DCI-PB-EN en 1209a
Load voltage The power electronics and thereby the motor are supplied
with DC voltage via the power supply connection.
} section 3.3.2
Logic voltage The logic components are either also supplied via the power
supply connection (except for MTR-DCI-32), or are supplied
separately from the load voltage via the fieldbus adapter
FBA-...
} Section 3.3.3
The permitted voltages and currents can be found in appen-
dix A.1.
Recommendation
For the load voltage supply, use a stabilised power supply
unit with high reserve capacity and external fuses.
Power supply units and fuses:
MTR-…-32 MTR-…-42 MTR-…-52 MTR-…-62
Recommended
power unit
(stabilised) DC 24 V /3 A DC 24 V / 6 A DC 24 V/ 10 A DC 48 V / 20 A
External fuse,
secondary 5 A slow-blowing 7 A slow-blowing 10 A slow-blowing 25 A slow-blowing
Tab. 3/3: Power supply units (for load voltage) and fuses