Festo Электромотор MTR-DCI - Manual (Page 189)

6. Diagnostics and fault display
6-17
Festo P.BE-MTR-DCI-PB-EN en 1209a
Station status 2 (MTR-DCI-related bits only)
Station status 2
Bit Meaning Explanation
0 Diag.Prm_Req 1 = The master must reconfigure the MTR-DCI
1 Diag.Stat_Diag 1 = The master must request diagnostic data until this
bit is set to 0
2 – Always 1 (set to logical 1 by the MTR-DCI)
3 Diag.WD_On 1 = Response monitoring/watchdog activated
4 Diag.Freeze_Mode 1 = Freeze activated 1)
5 Diag.Sync_Mode 1 = Sync activated 1)
6 – Reserved
7 Diag.Deactivated Always 0 (always reset to 0 by the MTR-DCI)
1) Only in conjunction with a diagnostic message.
Tab. 6/14: Diagnostic bits of station status 2
Station status 3
Station status_3
Bit Meaning Explanation
0...6 – Reserved
7 Diag.Ext_Diag_Overflow Is always logical 0 (set by the MTR-DCI).
Tab. 6/15: Diagnostic bits of station status 3