Festo Электромотор MTR-DCI - Manual (Page 280)

B. Supplementary information
B-74
Festo P.BE-MTR-DCI-PB-EN en 1209a
Version FCT PlugIn Min.
CI access 2067h 00h Var V-string r
Description Minimum version of the MTR-DCI FCT plugin required for commissioning the
MTR-DCI. Format = “xx.yy” (xx = main version, yy = secondary version).
Version FCT PlugIn Opt.
CI access 2068h 00h Var V-string r
Description Optimum version of the MTR-DCI FCT plugin for commissioning the MTR-DCI.
Format = “xx.yy” (xx = main version, yy = secondary version).
Scaling (control panel settings)
CI access 20D0h 01h, 02h Array uint8 rw/r
Description Definition of the units of measurement used on the control panel and the num-
ber of decimal places. See also CI object 20FFh/PNU 126.
Measuring Unit 20D0h 01h uint8 rw
Defines the unit of measurement ( Z 20FF03h).
The setting for the system of measurement units only affects the display
readout. All parameters are always saved in increments in the controller and
are not converted into the relevant measuring system until they are written or
read.
Values:
1 (0x01): Metric units of measurement:
e. g. mm, mm/s, mm/s 2
4 (0x04): Angular units of measurement (360°), e.g. degrees, degrees/s, de-
grees/s
2
8 (0x08): Revolutions: rev, rev/min, rev/min 2
15 (0x0F): Increments
Scaling Size 20D0h 02h uint8 r
Number of places after the decimal point. Fixed: 2. ( Z 20FF04h).